amtraPad-2 Rev.1 — amtraPad-2 Rev.1 Melbourne Meetup 2017 #3 Macropad Melbourne Meetup 2017 #3 Macropad —

amtraPad-2 Rev. 0.5

$1

SKU: APAD2-0.5 Categories: , Tag:

In stock

Share this product: 

A budget 2 key macropad powered by the Arduino Pro Micro.

Features

  • QMK compatible
  • Supports MX or Alps compatible switches
  • No diodes required!

Parts Required

  • 1x Pro Micro
  • 4x M2 standoffs + screws
  • 2x Switches

Build Instructions

  1. Clip switches in to the case.
  2. Solder the header pins included with your Pro Micro to the PCB.
  3. Place the PCB in to the case, lining up the switch holes.
  4. Solder in the Pro Micro, with the blank side of the Pro Micro PCB visible. Make sure the USB port is on the same side as the square pin.
  5. Insert the standoffs/screws.

Programming

Save the following as a .json and upload to https://amtra5keyboards.com.au/firmware-builder.

{"version":1,"keyboard":{"keys":[{"id":0,"legend":"Z","state":{"x":0,"y":0,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"a":7},"row":0,"col":0,"keycodes":[{"id":"KC_Z","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":1,"legend":"X","state":{"x":1,"y":0,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"a":7},"row":0,"col":1,"keycodes":[{"id":"KC_X","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]}],"controller":1,"bounds":{"min":{"x":0,"y":0},"max":{"x":2,"y":1}},"rows":1,"cols":2,"pins":{"row":["F7"],"col":["B1","F4"],"num":null,"caps":null,"scroll":null,"compose":null,"kana":null,"led":null,"rgb":null},"macros":{},"quantum":"void matrix_init_user(void) {n}nnvoid matrix_scan_user(void) {n}nnbool process_record_user(uint16_t keycode, keyrecord_t *record) {ntreturn true;n}","settings":{"diodeDirection":1,"name":"amtraPad-2 Rev0.5","bootloaderSize":2,"rgbNum":0,"backlightLevels":0}}}

Then follow the flashing instructions shown here https://angustrau.me/kb/programming-your-keyboard/.

Reviews

There are no reviews yet.

Be the first to review “amtraPad-2 Rev. 0.5”


Related Products

🇦🇺 All prices are in AUD Dismiss