A budget 2 key macropad powered by the Arduino Pro Micro.
- QMK compatible
- Supports MX or Alps compatible switches
- No diodes required!
- 1x Pro Micro
- 1x Case
- 2x Switches
- Clip switches in to the case.
- Solder the header pins included with your Pro Micro to the PCB.
- Place the PCB in to the case, lining up the switch holes.
- Solder in the Pro Micro, with the blank side of the Pro Micro PCB visible. Make sure the USB port is on the same side as the square pin.
Photo Credit: Komatoz